Helmet Test Equipment

According to the production of motorcycle helmet GB811-2010, it is mainly used to test the stiffness performance of motorcycle helmets. Widely used in motorcycle helmet related production, scientific research, quality supervision and testing and other units.

Parameter:

Force value range	0 ~ 2000N, accuracy 1%
Displacement range	0-500mm, precision 0.1mm
Timing range	0-99min, precision 0.1s
Test speed	0-500mm/min;when no load, infinitely variable speed can be adjusted. Easy and quick adjustment of position based on helmet size. 50N/min during test and 100N/min during unloading are automatically switched according to the test procedure.
Stiffness plate	metal plate hardness 45HRC
Power	AC220V, 50Hz

Features:

1.The host structure of a single column structure, up and down straight line movement

2.The test process touch screen + PLC + special test program control. Automatic control of the program, the use of special motors and controllers, the speed does not need to be manually adjusted, the program automatically adjusts according to the test conditions, automatic test data and results of judgment and processing.

3.Test to maintain the test program automatic closed-loop control, automatic 2min of the fixed force value to maintain. No need to adjust manually according to the change of force value.

4. Real-time display of force value, time, displacement, deformation, speed, test curve, etc. during the test.

Results of the decision:

According to GB811-2010 motorcycle member helmet regulations, helmet stiffness performance should be met (only for Class A helmets)

1. Under the force of 630N, the difference between the deformation along the test shaft and the initial load of 30N is not more than 40mm.

2. When gradually unloading and restoring the load of 30N, the difference between the measured deformation and the initial load of 30N is not more than 15mm.

Applicable standards : GB811-2010