Battery Tester

The test should be conducted at an ambient temperature of 20 ℃± 5 ℃. The battery with a thermocouple (the contact of the thermocouple is fixed on the large surface of the battery) should be placed in a fume hood, and a corrosion-free steel needle with a diameter of 2-8mm should be used to pierce the center position of the maximum surface of the battery at a speed of 10mm/s~40mm/s, and maintained at any time.

Instrument features:

1.Surface treatment of the body: DuPont powder from the United States, electrostatic spray painting process, cured at high temperature of 200 ℃ to ensure long-lasting color fastness.

2.Hydraulic drive, low noise, high force resolution.

3.Specially hardened steel needle, durable and long-lasting

4.Separate needle punching fixture group, which can fix different conditions of the site

5.Color integrated controller with automatic smoke exhaust control function

Meet standards:

MT/T105GB/T18332，GB/T88974，QC/T473/744, QC/T743，GB/T31845-2015，YD/B032

Instrument parameters:

Steel needle	ф 3mm~8mm， high-temperature resistant steel needle， length：150mm
Needle stroke	200mm
Unit conversion	Kg, N, LB
Needling speed	10~40mm/s (can be specified)
Acupuncture force value	10KN
Force value display	touch screen display
Force measurement accuracy	± 1%
Drive method	hydraulic drive
Weight	approximately 100kg
Power supply	1f, 220V, 50HZ