English
Russian
How to Adjust The Pressure of The Pneumatic Slicer？
Time:2025-05-13
Views:2
1. Open the controller and find the pressure adjustment knob of the pneumatic press.
2. Turning the pressure adjustment knob clockwise can increase the pressure, while turning it counterclockwise can decrease the pressure.
3. Continuously test the pressure while adjusting the knob until the desired pressure is reached.
4. Secure the adjustment knob so that it does not move due to vibration.
1. Use an automatic regulator, which typically sets a target pressure and automatically adjusts the pressure of the pneumatic press.
2. The regulator is usually connected to the air supply pipeline of the pneumatic press, and automatically adjusts the pressure according to the designed parameters.
If you want to change the target pressure, simply reset the regulator.
4. It should be noted that when adjusting the pressure of a pneumatic press, it is important to pay attention to the limitations of the pressure range to avoid machine damage or abnormal operation caused by excessive or insufficient pressure. At the same time, it is necessary to regularly check the pressure gauge and pressure switch of the pneumatic press to ensure their working status and accuracy.
When using a pneumatic press, the following points should also be followed:
A. Ensure that the quality of compressed air meets the requirements to avoid damage to the pneumatic press and its components.
B. Regularly clean the interior and exterior of the pneumatic press.
C. Reduce the idle time of the pneumatic press and minimize the wear and tear on the equipment as much as possible.
D. Before operation, please read the operating manual carefully and follow the operating steps.
In summary, there are two methods for adjusting the pressure of pneumatic presses: manual adjustment and automatic adjustment. When using, attention should be paid to the pressure range and equipment maintenance.
8618576390297
Sales3