English
Russian
Application:
Zirconia, alumina, ceramic powder, magnetic powder, stainless steel powder, metal powder, hard alloy, rubber, plastic, hot melt adhesive, universities, research institutes, enterprises for high filling, color masterbatch, thermoplastic elastomer, rubber and plastics Master batch materials, modified engineering plastics, special materials for wire and cable, EVA, PVC, carbon black, low-smoke-free materials, TPR and other chemical raw materials, suitable for the mixing and mixing of various raw materials.
Technical parameters:
|
Effective mixing volume |
5L |
|
Batch input |
1~3KG (depending on the proportion of the formula material) |
|
Main motor |
7.5KW |
|
Reducer |
hard-toothed gear reducer |
|
Pressurized cylinder |
diameter 100mm |
|
Front and rear speed ratio |
1:1.38 |
|
Front and rear speed |
0~47-34 rev / min (frequency conversion adjustable speed) Brand: Danfoss (HLP) |
|
Heating method |
electric heating |
|
Temperature control range |
normal temperature ~300 °C |
|
Material temperature control |
instrument control |
|
Control System |
Control Electrical Components Taiwan Brand |
|
Opening and closing locking device |
using cylinder control |
|
Heating power |
6.8KW |
|
Total power |
15.3KW |
|
Voltage |
380V, 50Hz, three-phase five-wire system |
|
Size |
L1700*W1250*H2200mm |
|
Weight |
1600KG |
Features:
1. Equipment concept, uniform mixing material, convenient color refueling, stable transmission system, accurate noise-free, wear-resistant and corrosion-resistant. The mixing chamber adopts electric heating and water cooling, which has the advantages of fast heating, precise temperature control, environmental protection and energy saving, low maintenance rate, high production efficiency, separation performance and mixing effect.
2. In terms of material clearing, the design of the open mixing chamber is adopted, the drawer type is opened, the material is dropped, the material has no dead angle, and the residue is zero, which has a very good advantage for the more expensive anti-pollution materials.
3. The design of the rotor is detachable, which can be easily disassembled, easy to operate and easy to maintain.
4. The sealing design of the machine adopts the dry mechanical pressing shaft seal with self-lubrication, and the other end adopts the hydraulic pressing method, and the sealing effect is good.
5. Heating method, using imported heating tube mosaic type, heating power: 6kW maximum temperature 300 °C, high heat efficiency, stable temperature control, fast heating, energy saving has a great advantage.
6. The whole machine covers a small area, saving your land area and humanized design.
7. Drilling cavity material: 718 die steel is selected, the hardness is strengthened by quenching and tempering, hardness HRC60°C-62°C
8. Surface treatment of the mixing chamber: chrome plating, surface polishing treatment.
9. Dust removal system: the equipment is equipped with a vacuum system
8618576390297
Sales3