Application:
Leather folding tester is used for the flexural test of shoe upper leather and thin leather (shoe upper leather, handbag leather, bag leather, etc.) and cloth folding back and forth.
Test principle:
The folding resistance of the leather refers to the bending of one end surface of the test piece as the inside, and the other end surface as the outside, especially the two ends of the test piece are installed on the designed test fixture, one of the fixtures is fixed, the other fixture is reciprocated to bend the test piece, until the test piece is damaged, record the bending number, or after a certain number of bending. Look at the damage.
Standard:
BS-3144, JIB-K6545, QB1873, QB2288, QB2703, GB16799-2008, QB/T2706-2005 and other leather flexure inspection method required specifications.
Technical parameters:
Test grip |
6 PCS |
Bending angle |
22.5°±0.5° |
Bending rate |
100 (±5) C.P.M |
Counter |
6 digits |
Motor |
400W |
Input power |
AC220V 50HZ |
Machine size |
about 450×500×350(mm) |
Machine weight |
about 35kg |