Textile Test Machine

Introduction:

Textile Fabric Fiber Slicer is suitable for textile, fiber industry departments, scientific research units to cut fibers or yarn into tiny cross-section slices, and observe its morphological structure through a microscope.

Technical Parameters:

Working principle:

The structure diagram of the instrument is shown in the following figure: the instrument is composed of two 1.6mm thick stainless steel bottom plates. The left and right bottom plates of the slicer have a 0.8mm wide sample slot on the right bottom plate, which cooperates with the plug on the left bottom plate to match the sample Push tight. The uniform feeding frame is centered on the uniform feeding frame pillar. When the uniform feeding knife is disengaged from the inserting groove, it can be rotated while lifting the positioning nail. There is a uniform feeding knife above the sample. Adjust the uniform feeding screw to control the sample to extend out of the bottom plate thickness of. Use a blade to cut a thin slice of the sample under the bottom plate.